1. How does Clarius work?
2. Where is the most effective location to place Clarius?
3. Can I use Clarius in the car?
4. Can I use Clarius for sleeping?
5. Is Clarius safe to use with my baby?
6. Can I use Clarius with my Negative Ion Generator?
7. How do I choose the right program?
8. The SLED doesn’t light when I plug in the power adapter.
9. The SLED flashes two colors rapidly when I plug in the power adapter.
10. What is a Wellness Number (Critical Flicker Fusion)?
11. How do I measure my Wellness Number (Critical Flicker Fusion)?
12. What is a normal Wellness Number?
13. How do I activate the EMR Detector?
14. How do I check to see what version and preset programs in Clarius?
15. How do I update Clarius?
16. Where can I download the User Guide?
17. Can I extend the warranty after it’s expired?
_________________________________________________________________________
Clarius works by emitting non-sensory, non-invasive Bio-Pulses, precise pulses of Fibonacci Number derived frequencies supporting brainwave entrainment. Monitoring brainwave activity of persons within the effective field of Clarius shows brainwave activity following the patterns emitted by Clarius. Our bodies experience ultradian rhythms, or cycles, while we’re awake, similar to those that occur when sleeping, but at higher frequencies, and over longer durations. This is evident in the common experiences with a mid-morning slump and the need for a nap shortly after lunch. These rhythms are controlled by our SupraChiasmatic Nucleus (SCN) a small organ in the midline of our brain. The SCN is affected by electromagnetic radiation (EMR) and Clarius’ Bio-Pulses act to restore our SCN’s internal timing while interrupting external sources of disruptive EMR.
Clarius produces a torus (donut) shaped ‘force-field’ of healthy Bio-Pulse energies approximately 6 feet (2 meters) in all directions. This field expands the longer Clarius is left running in a fixed location. If you work at a desk with a computer on or under your desk, place Clarius on your desktop with either side facing up. Clarius can be powered by either the included 5V USB power adapter or by connecting it to a spare, powered USB port on your computer or USB Hub.
2. Where is the most effective location to place Clarius?
If you work at a desk with a computer on or under your desk, place Clarius on your desktop with either side facing up. Clarius will not interfere with your computer or other electronics in its force-field area. Clarius can be left on continuously and the longer Clarius runs the more effective it will be in clearing unwanted energies while restoring the natural balance of your ultradian rhythms. Clarius also ‘back-feeds’ the Bio-Pulses through the power or USB cable connected to it. This means Clarius will also improve the energies being emitted from your computer and the wiring in the immediate area around its power adapter.
Clarius can be used in your home, or other living spaces. It is best to be centrally placed, as on an end-table, or countertop. Clarius can be used where foods are prepared and served. It can be placed underneath serving dishes or beverage containers to clear the energies in your consumables.
Clarius can be placed in a waiting area or any place people congregate to create a clearer and more inviting space. Clarius is great for use in classrooms and playrooms with children of all ages. Clarius is also safe to use with infants, while ensuring to keep the power cable away from their reach.
You can clear unwanted energies in personal items you carry, such as rings, necklaces, watches, jewelry, cellphone, tablets, pens, wallet, keys, all without causing any damage or erasure to any electronic or magnetic media, including credit cards. Simply place the items on or near Clarius for an hour or longer.
Crystals or other healing instruments can be placed on or near Clarius to clear and recharge their energies.
3. Can I use Clarius in the car?
Yes, Clarius is very effective when used in your automobile for reducing road fatigue. Any standard 5V USB car adapter that converts the 12VDC cigarette lighter power adapter to a mini-B 5V USB connector, similar to those used for cell phones, can be used to power Clarius.
4. Can I use Clarius for sleeping?
While Clarius is intended to be used while awake, there are two presets, #7 and #8 that are suitable for sleep and deep relaxation. These two preset should never be used while driving or operating machinery.
5. Is Clarius safe to use with my baby?
Yes. Our bodies will only absorb or use an amount of resonant energy based upon its mass, or weight. The smaller size of an infant means a child or infant will be receive less energy than the larger mass of an adult.
6. Can I use Clarius with my Negative Ion Generator?
Negative Ion Generators, like Ionic Breeze or other high energy discharge air cleaners, generate a large field on negative ions that act like a static charge and can damage sensitive electronic equipment like Clarius. Clarius should be kept at least 6 feet away from any negative ion generator, and its AC power adapter should never be plugged into the same power outlet as the negative ion generator.
7. How do I choose the right program?
Clarius comes preconfigured to start with Preset Energy Clearing Program #1, Focused Attention. This preset is effective for individuals who find their energy slumping frequently during the day. Use this preset instead of having a cup of caffeine. This preset also works well in your automobile when driving for extended periods of time to help you stay focused and attentive behind the wheel.
Preset #2, Solfeggio Plus, is a great balancing and centering program well suited for Type A personalities, those who have a hard time slowing down and need to stay balanced and relaxed while working. Use this when stress gets you too wound up and you feel yourself needing to relax and still stay focused and productive. Solfeggio Plus is great in the car to reduce tension and stress during stop-and-go commuting.
Preset #3, Body Blaster, is recommended when you’re feeling ill. Its blend of broad spectrum Rife frequencies improves wellness and helps you get back on your feet quickly.
Preset #4, Higher Consciousness, is recommended for use during meditations and for individual that are interested in exploring states of expanded awareness associated with what is commonly referred to as an Out-Of-Body-Experience.
Preset #5, Prana Yama, is great for those times that you need to reconnect with yourself, and as an alternate meditation program.
Preset #6, Heart and Life Energies is designed to help reintegrate your awareness back into your body. It is recommended for use during times when you simply feel disconnected or overly distracted. This is a trial preset and will operate for one month before removing itself. This preset is available for download as a permanent preset for a minimal cost.
Preset #7, Lucid Dreaming is an alternate sleep preset not intended for persons with sleep problems. It is intended to assist healthy individuals in achieving lucid dreaming states. This is a trial preset and will operate for one month before removing itself. This preset is available for download as a permanent preset for a minimal cost.
Preset #8, Dream Machine 7.83-12Hz Journey is an alternative sleep and deep meditation preset program that starts with Theta brainwave frequencies to help synchronize with your active brain patterns and then quickly lowers the frequencies to bring you into an alpha state of brain activity similar to a hypnotic state. Towards the end of the 90 minute cycle the frequencies increase to bring you back into focused awareness.
8. The SLED doesn’t light when I plug in the power adapter.
If Clarius doesn’t illuminate the SLED when connected to its power adapter then try using the USB programming cable to power Clarius. If it still doesn’t illuminate contact NuTesla support at support@nutesla.com.
9. The SLED flashes two colors rapidly when I plug in the power adapter.
This indicates Clarius has detected an internal component failure. Contact NuTesla support via email at support.nutesla.com for instructions have your Clarius repaired.
10. What is a Wellness Number (Critical Flicker Fusion)?
Your Rhythmedics Clarius includes the ability to measure and report your personal Wellness Number, also referred to as your Critical Flicker Fusion (CFF) number. It is recommended to read this section fully in advance of measuring your Wellness Number. After reading this section you can run the test multiple times to get familiar with the procedure.
Flicker Fusion is the rate at which a distinctly flashing on and off light appears to fuse into a constantly illuminated light. It was discovered in 1945 during testing of WWII pilots returning home after the war with Post Traumatic Stress Disorder that their recovery could be measured objectively by tracking their flicker fusion frequency, which NuTesla calls the Wellness Number. The higher the numbers the further along the pilots were in their recovery. Your wellness number is a personal indicator of your overall wellness. The higher your wellness number, the higher your personal wellness level.
11. How do I measure my Wellness Number (Critical Flicker Fusion)?
To activate this feature press and hold the SETUP switch for 1 second and release it. The Spectrum LED will flash Red 6 times to indicate your Wellness Number testing is beginning. After these 6 flashes the Red SLED will appear to be lit continuously when it is actually flashing very rapidly.
Hold Clarius between your thumb and forefinger close to your face with the SLED directly in front of your dominant eye and your forefinger finger on the SETUP switch to press it when you see a definite flickering of the SLED. As the program runs the on and off times are lengthened and the apparently constantly lit Red SLED appears to start flickering, which to some looks like water boiling when staring directly into the Red SLED. As the frequency continues to slow this boiling appearance begins to be more pronounced where there is still no time when the SLED appears to be off. As the frequency continues to slow this flickering becomes a distinct on and off flashing.
Pressing the lower SETUP dome switch will cause the flickering to decrease one step and stops the automatic slowing of the flicker rate for measuring. Pressing and holding the lower SETUP dome switch will decrease the flickering rate more quickly.
Pressing the upper SELECT dome switch will cause the flickering to increase one step and stops the automatic slowing of the flicker rate for measuring. Pressing and holding the upper SELECT dome switch will increase the flickering rate more quickly.
Once you press either the SETUP or SELECT dome switches two things occur. First, the automatic decreasing of the flickering rate is suspended (the SLED continues to flash at that rate) and secondly, a 5 second timer starts which ends the measuring if it times out. If either switch is pressed, the flickering rate is adjust up or down accordingly and the 5 second timer is restarted. It is recommended to take some time to press and release the two switches, separately, to adjust the flickering rate up and down until you are satisfied it is at the point of fusing to a constantly on light.
After releasing both switches and the five second timer expires the measuring phase ends and Clarius will then report your Wellness Number. The Red SLED will turn off and Clarius will then report your three digit Wellness Number as three series of flashes. The first series of flashes uses the white SLED to count out the tens digit in multiples of ten (four white flashes is 40, 5 white flashes is 50), the second series of flashes uses the green SLED to count out the ones digit (6 green flashes is 6), and the third series of flashes uses the amber SLED to count out the tenths digit (4 amber flashes is .4). Adding the three series of flashes together yields your personal Wellness Number (46.4 or 56.4 from the example above). The upper limit is 89.9. If the ones or tenths digit is a zero it will be reported by a single flash of the Blue SLED (the tens digit cannot be zero). If you counted 5 white flashes then saw a blue flash followed by 3 amber flashes your Wellness Number would be 50.3.
12. What is a normal Wellness Number?Most people report having a Wellness Number between 50 and 90. Due to differences in the physiology of our eyes you cannot compare your wellness number to someone else’s. By measuring and tracking your wellness number you can track improvements to your health resulting the use of Clarius.
13. How do I activate the EMR Detector?
To activate the internal EMR detector press and hold the SELECT dome switch as explained in the previous section, until the SLED flashes Blue four times. Release the SELECT dome switch when the Blue flashing begins. In safe EMR environments the SLED should now be illuminated in a continuous Blue color indicating only a slight amount of EMR is being detected. Off indicates no measurable EMR and Blue indicates less than 3 milliGauss (3 thousandths of a Gauss) of field strength. If any other color is seen then the immediate area has a greater level of EMR and the source should be identified and possibly eliminated.
EMR fields diminish rapidly as you move further away from its source and the internal EMR detector will usually need to be placed directly in contact with most EMR sources to indicate its presence. The strength of EMR is indicated by four different brightness levels within the 7 different colors with no illumination as zero field strength, Blue being the lowest safe level below 3 milliGauss and White indicating the highest level of more than 25 milliGauss. As you move the instrument next to an EMR source the brightness of the SLED will increase first and then the color will change.
14. How do I check to see what version and preset programs in Clarius?
Connect Clarius to an active USB port on either a Windows PC or MacOS computer and press and hold the START dome switch until the SLED starts flashing green or red and green and then release the dome switch. Clarius will enumerate (appear to the computer) as a flash drive named Rhythmedics. View the contents of this flash drive and open the file named NUTESLA.HTM. This will open your default Internet Browser and Clarius’ Instrument Information window will be displayed listing its Serial Number, Version Number and installed preset programs. When done, press and release the SELECT dome switch to exit the flash drive mode. Windows or MacOS may display a warn in message when this occurs, but it will not harm either your computer or Clarius.
To update Clarius click on this link to access detailed instructions and update files for Windows PC or MacOS.
16. Where can I download the User Guide?
The current User Guide can be downloaded by clicking here.
17. Can I extend the warranty after it’s expired?
Yes. A low cost warranty extension may be purchased from NuTesla by clicking here.